| astao276 |  Posté 08/04/2020 07:36The main purpose of hot-dip galvanizing tank is water storage equipment. We also advocate using galvanized steel tank to store domestic water. Of course, we can also pack some other solvents. But we suggest that it is better not to pack some corrosive liquids such as sulphuric acid and hydrochloric acid. So today, Yongda will introduce the matters needing attention in the use of galvanized steel water tank water supply system. 1. Attention should be paid to the air leakage at the joints of the intake pipe and the inlet of the pump. If the air leakage is found, it should be blocked quickly. 2. Attention should be paid to the change of water level in the intake pool or machine well of stainless steel water tank. If the water level in the pool or well falls below the prescribed minimum level, pumping should be stopped immediately to prevent the pump from sucking air because of insufficient submergence depth. 3. Attention should be paid to the presence or absence of impurities in the intake pool, and to the presence or absence of impurities in the intake faucet or the intake horn mouth. If so, it should be removed soon. In addition, stainless steel water tank should pay attention to as far as possible not to coat belt wax, not to coat rosin or other resins. 4. Pay attention to whether the packing is normal: the packing should not be pressed too tight or too loose, so it is better to keep dripping water when running. If there is too much water and no dripping at all, it means that the packing pressure is too loose. If there is too little water, it takes a long time to drip a drop or no water at all, it means that the packing pressure is too tight. If it is found too loose or too tight, it should be adjusted immediately. Hot dip galvanized water storage tank Frame Hot dip galvanized water tank factory website:http://www.wrwatertanks.com/hot-dip-galvanized-water-tank/ |